Remote Commands
R&S
®
FSMR3000
481
User Manual 1179.0116.02 ─ 02
Suffix:
<n>
.
Return values:
<WindowName>
String containing the name of a window.
In the default state, the name of the window is its index.
Example:
LAY:WIND2:IDEN?
Queries the name of the result display in window 2.
Response:
'2'
Usage:
Query only
LAYout:WINDow<n>:REMove
This command removes the window specified by the suffix <n> from the display in the
active channel.
The result of this command is identical to the
command.
Suffix:
<n>
.
Example:
LAY:WIND2:REM
Removes the result display in window 2.
Usage:
Event
LAYout:WINDow<n>:REPLace
<WindowType>
This command changes the window type of an existing window (specified by the suffix
<n>) in the active channel.
The effect of this command is identical to the
mand.
To add a new window, use the
command.
Suffix:
<n>
.
Setting parameters:
<WindowType>
Type of measurement window you want to replace another one
with.
See
on page 475 for a list of availa-
ble window types.
Example:
LAY:WIND2:REPL MTAB
Replaces the result display in window 2 with a marker table.
Usage:
Setting only
Configuring the Measurement