manualshive.com logo in svg

R&S FSMR3000, Руководство пользователя, Страница: 234 / 733

Поделиться
Скачать
R&S FSMR3000 Скачать руководство пользователя страница 234

Common Analysis and Display Functions

R&S

®

FSMR3000

234

User Manual 1179.0116.02 ─ 02

Decimal Separator

Defines the decimal separator for floating-point numerals for the data export/import
files. Evaluation programs require different separators in different languages.

Remote command: 

FORMat:DEXPort:DSEParator

 

on page 561

Export Trace to ASCII File

Saves the selected trace or all traces in the currently active result display to the speci-
fied file and directory in the selected ASCII format.

"File Explorer": Instead of using the file manager of the R&S

 

FSMR3 firmware, you can

also use the Microsoft Windows File Explorer to manage files.

If the spectrogram display is selected when you perform this function, the entire histo-
gram buffer with all frames is exported to a file. The data for a particular frame begins
with information about the frame number and the time that frame was recorded. For
large history buffers the export operation can take some time.

For details on the file format in the Spectrum application, see 

Chapter 8.5.3, "Refer-

ence: ASCII File Export Format"

, 

on page 236.

Note: 

Secure user mode.

Importing and Exporting Measurement Results for Evaluation

Содержание FSMR3000






























































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов