R&S FSMR3000, Руководство пользователя

Страница: 188 / 733

Common Analysis and Display Functions
R&S
®
FSMR3000
188 User Manual 1179.0116.02 ─ 02
Remote command:
CALCulate<n>:LIMit<li>:CONTrol[:DATA]
on page 545
CALCulate<n>:LIMit<li>:LOWer[:DATA]
on page 548
CALCulate<n>:LIMit<li>:UPPer[:DATA]
on page 551
Insert Value
Inserts a data point in the limit line above the selected one in the "Edit Limit Line" dia-
log box.
Delete Value
Deletes the selected data point in the "Edit Limit Line" dialog box.
Shift x
Shifts the x-value of each data point horizontally by the defined shift width (as opposed
to an additive offset defined for the entire limit line, see
"X-Offset" on page 186).
Remote command:
CALCulate<n>:LIMit<li>:CONTrol:SHIFt
on page 547
Shift y
Shifts the y-value of each data point vertically by the defined shift width (as opposed to
an additive offset defined for the entire limit line, see
"Y-Offset" on page 186).
Remote command:
CALCulate<n>:LIMit<li>:LOWer:SHIFt
on page 549
CALCulate<n>:LIMit<li>:UPPer:SHIFt
on page 552
Save
Saves the currently edited limit line under the name defined in the "Name" field.
Import
Opens a file selection dialog box and loads the limit line from the selected file in
.CSV
format.
Note that a valid import file must contain a minimum of required information for the
R&S
FSMR3.
Remote command:
MMEMory:LOAD<n>:LIMit
on page 556
File Explorer ← Import
Opens the Microsoft Windows File Explorer.
Remote command:
not supported
Export
Opens a file selection dialog box and stores the currently displayed limit line to the
defined file in
.CSV
format.
The limit line can be imported again later by the R&S FSMR3 for use in other measure-
ments.
Result Display Configuration