R&S FSMR, Руководство по эксплуатации

Страница: 544 / 955

ABORt / CALCulate-Subsystem R&S FSMR
1313.9723.12 6.1-8 E-1
ABORt Subsystem
The ABORt subsystem contains the commands for aborting triggered actions. An action can be
triggered again immediately after being aborted. All commands trigger events, and therefore they have
no *RST value.
COMMAND PARAMETERS UNIT COMMENT
ABORt --
--
--
-- no query
ABORt
This command aborts a current measurement and resets the trigger system.
Example: "
ABOR;INIT:IMM"
Characteristics: * RST value: 0
SCPI: conforming
Mode: A, GSM/EDGE, FM
CALCulate Subsystem
The CALCulate subsystem contains commands for converting instrument data, transforming and
carrying out corrections. These functions are carried out subsequent to data acquistion, i.e. following the
SENSe subsystem.
The numeric suffix is used in CALCulate to make the distinction between the two measurement windows
SCREEN A and SCREEN B:
CALCulate1 = Screen A
CALCulate2 = Screen B.
For commands without suffix, screen A is selected automatically.
Full Screen
The settings are valid for the measurement window selected with the numeric
suffix. They become effective as soon as the corresponding measurement window
has been selected as active measurement window using the command
DISPLay[:WINDow<1|2>]:SELect
. Triggering measurements and querying
measured values is possible only in the active measurement window.
Split Screen
The settings are valid for the measurement window selected by means of the
numeric suffix and become effective immediately.