R&S esu, Быстрый старт

Страница: 79 / 223

Quick Start Guide 1302.6163.62 - 04 2.29
R&S ESU Preparing for Use
Setup
IEC bus command:
HCOP:CMAP:DEF1
➢
The OPTIMIZED COLORS softkey selects an optimized color setting for the printout in
order to improve color clarity on the printout.
With this selection, trace 1 will be printed out in blue, trace 2 in black, trace 3 in green and
the markers in turquoise.
The other colors correspond to the screen colors of the
DISP – CONFIG DISPLAY -
DEFAULT COLORS 1 softkey.
IEC bus command:
HCOP:CMAP:DEF2
➢
The USER DEFINED softkey opens a submenu for user-defined color selection (see the
USER DEFINED COLORS submenu).
The procedure for making the settings is similar to that for setting the screen colors.
IEC bus command:
HCOP:CMAP:DEF3
2.4.8 Installing Plug&Play Printers
Plug&play printers can be easily installed under Windows XP:
After you connect and switch on a printer, Windows XP automatically detects the printer and
installs the associated driver, provided that the driver is contained in the Windows XP
installation.
If Windows XP does not find the printer driver, it will prompt you to enter a path for the
associated installation files. In addition to the pre-installed drivers, a number of additional
printer drivers are found in the D:\I386 directory.
You can find a detailed step-by-step procedure in Appendix
A , section “ Installing Non-
Plug&Play Printers” on page A.6 .
The background will always be printed out in white and the grid in black.
When you install printer drivers that are not pre-installed on the
instrument, the installation process will prompt you to specify the path
containing the new driver. This can be a memory stick or USB CD-ROM
drive (see the section
“ Connecting USB Devices (e.g. a Power Meter)”
on page 2.13 ).