R&S esu, Быстрый старт

Страница: 78 / 223

R&S ESU Preparing for Use
Setup
2.28 Quick Start Guide 1302.6163.62 - 04
➢
You can also redirect the output to a file rather than to a printer. To do this, select the field
Print to File by using the rotary knob and then mark the appropriate selection box or cancel
the marking by pressing either the rotary knob or the ENTER key:
➢
You can select orientation for paper printout by using the Orientation field. To open the
selection list, press the rotary knob or ENTER :
From the selection list, you can now select the orientation you want ( Portrait in the
preceding figure) by using the rotary knob again and then confirm with ENTER or by
pressing the rotary knob. The selection list will then close and the entry cursor will return to
the
Orientation field.
You can now close the dialog box by pressing the ESC key or by selecting and confirming
the Close button.
2.4.7.1 Selecting Alternative Printer Configurations
The R&S ESU can support two independent hardcopy settings. This allows you to quickly
switch between output to a file and a printer.
➢
To make a selection, use the DEVICE 1 / 2 softkey, which simultaneously shows the
associated setting when the Hardcopy Setup dialog box is open.
IEC bus command:
-
2.4.7.2 Selecting Printer Colors
➢
The COLORS softkey opens the submenu for selecting the colors for the printout. To make
it easier for you to select colors, the selected hardcopy color combination is displayed on
screen when you access the menu. When you exit the menu, the system switches back to
the previous color combination.
➢
The COLOR ON OFF softkey switches from color output to black-and-white printout. In this
case, all background colors will be printed out in white and all color lines in black. This
allows you to improve contrast on the printout. The basic setting is COLOR ON.
IEC bus command:
HCOP:DEV:COL ON
➢
The SCREEN COLORS softkey selects the current screen colors for the printout.
The background will always be printed out in white and the grid in black.