R&S esu, Быстрый старт

Страница: 72 / 223

R&S ESU Preparing for Use
Setup
2.22 Quick Start Guide 1302.6163.62 - 04
IEC bus command:
SYST:LANG "SCPI" | "8560E" |
"8561E" | "8562E" | "8563E" |
"8564E" | "8565E" | "8566A" |
"8566B" | "8568A" | "8568A_DC" |
"8568B" | "8568B_DC" | "8591E" |
"8594E" | "71100C" | "71200C" |
"71209A"
2.4.3.3 ID Response String
➢
The ID STRING FACTORY softkey selects the default response to the command *IDN?.
IEC bus command:
--
➢
The ID STRING USER softkey opens the editor for entering a user-defined response to the
command *IDN?. The max. length of the output string is 36 characters.
IEC bus command:
--
2.4.4 Setting the Screen Colors
➢
Press the DISP key.
The DISPLAY menu will open.
8563E 601 0 Hz 26.5 GHz 0 dBm AC
8564E 601 0 Hz 40 GHz 0 dBm AC
8565E 601 0 Hz 50 GHz 0 dBm AC
8566A/B 1001 2 GHz 22 GHz 0 dBm DC (R&S ESU)
8568A/B 1001 0 Hz 1.5 GHz 0 dBm AC
8591E 401 0 Hz 3 GHz 0 dBm AC
8594E 401 0 Hz 3 GHz 0 dBm AC
71100C 1001 2 GHz 22 GHz 0 dBm DC (R&S ESU)
71200C 1001 2 GHz 22 GHz 0 dBm DC (R&S ESU)
71209A 1001 2 GHz 22 GHz 0 dBm DC (R&S ESU)
Note regarding the selection of 856x for the R&S ESU:
• The # of trace points is not switched over until the state changes to
REMOTE. In the case of switchover to manual operation ( LOCAL
key), the number of sweep points is always changed to 625.
• If necessary, the stop frequency specified in the table is restricted to
the corresponding frequency range of the R&S ESU.
Model # of Trace
Points Start Freq. Stop Freq. Ref Level Input Coupling