R&S esu, Быстрый старт

Страница: 138 / 223

R&S ESU Basic Measurement Examples
Storing and Loading Instrument Settings
5.34 Quick Start Guide 1302.6163.62 - 04
5.7 Storing and Loading Instrument Settings
The R&S ESU can store complete instrument settings together with instrument configurations
and measurement data internally as a data record. The data is stored on the built-in hard disk
or – if selected – on a network drive or a removable drive (e.g. a memory stick). The hard disk
has the name D: (drive C: is reserved for the operating system).
The preset state (=
Current Settings ) includes that the settings of the measurement functions,
activated limit lines and the active transducer factor are stored.
Use the ITEMS TO SAVE/RCL function to store/load traces and to store additional limit lines
and transducer factors.
5.7.1 Storing an Instrument Configuration (without Traces)
You can store an instrument configuration as follows:
➢
Press the FILE key and then the SAVE softkey.
The selection dialog box for instrument configurations will open:
➢
Enter the name of the data record to be stored (which is a digit from 0 to 9 in the simplest
case) and press
ENTER . The data record will be stored and the dialog box will close.