R&S ESU Series, Руководство по эксплуатации

Страница: 438 / 855

Operating Manual 1302.6163.12 - 03 5.33
R&S ESU Remote Control – Basics
Status Reporting System
5.7.5 Resetting Values of the Status Reporting System
The table below comprises the different commands and events causing the status
reporting system to be reset. None of the commands, except for *RST and SYSTem:
PRESet influences the functional instrument settings. In particular, DCL does not
change the instrument settings.
1) Every command being the first in a command line, i.e., immediately following a <PROGRAM MESSAGE TERMINATOR> clears the output
buffer.
Event Switching on
supply voltage DCL,SDC
(Device Clear,
Selected
Device Clear)
*RST or
SYSTem:
PRESet STATus:
PRESet *CLS
Power-On-Status-
Clear
Effect 0 1
Clear STB,ESR — yes — — — yes
Clear SRE,ESE — yes — — —
Clear PPE — yes — — —
Clear EVENTt parts of the
registers — yes — — yes
Clear Enable parts of all
OPERation and QUEStionable
registers, Fill Enable parts of all
other registers with "1". — yes — — yes —
Fill PTRansition parts with "1" ,
Clear NTRansition parts — yes — — yes —
Clear error queue yes yes — — — yes
Clear output buffer yes yes yes 1) 1) 1)
Clear command processing and
input buffer yes yes yes — — —