Instrument tour
R&S
®
EDST300
30
Getting Started 1179.5647.02 ─ 01
5.2.8
LAN interface
Use the "LAN" interface to connect the R&S
EDST300 to a local network for
remote control, printouts or data transfer. The data can be transferred with a rate
of up to 1
Gbit per second. Configure the IP address and subnet mask in the gen-
eral instrument settings.
5.2.9
DVI
You can connect an external (TFT) monitor or other display device to the
R&S
EDST300's DVI (Digital visual interface) to provide an enlarged display. The
interface consists of a DVI-D socket (24+1).
Chapter 4.8.4, "Connecting an external monitor"
5.2.10
RS232 GPS interface
2-port RS232, 9-pin D-Sub connector for a GPS receiver providing NMEA proto-
col data. The NMEA protocol data is displayed and stored with the recorded data.
5.3
Device ID
The unique device identifier is provided as a barcode sticker on the rear panel of
the R&S
EDST300.
It consists of the device order number and a serial number.
Device ID
