Sample Application
R&S
®
DVMS1
31
Getting Started 2113.7619.02 ─ 12
6.3
Creating a Basic Configuration
In the TS analyzer monitoring application, create the basic configuration.
1. In the toolbar, select "Instrument Configuration" to open the "Instrument Configura-
tion" dialog.
2. On the "Signal Interface" tab, select the following:
a) In the "Interface Settings" column, activate the "TS In" option.
b) Deactivate all other input options.
3. Click "OK".
4. In the toolbar, select "Input Configuration" to open the "Input Configuration Assign-
ment" dialog.
5. Under "Monitoring Configuration", select "Config (DVB)".
6.4
Checking the TS Synchronization
Before any measurement can be performed, the TS synchronization within the
R&S
DVMS TS analyzer must achieve the "Locked" state. To check the current state,
perform the following steps.
1. In the toolbar, click "View Selector".
2. In the "View Selector" dialog, click the icon for the statistics
&
log measurement.
3. Click "Control" and select "Clear Statistics & Log".
Checking the TS Synchronization
