R&S DVMS1, Начало работы

Страница: 35 / 60

Switching On or Off the Instrument
R&S
®
DVMS1
29 Getting Started 2113.7619.02 ─ 12
5.2 Switching Off the Instrument
Risk of losing data
If you switch off the running instrument using the rear panel switch or by disconnecting
the power cord before shutting it down, the instrument loses its current settings. Fur-
thermore, program data can be lost.
Always shut down the R&S
DVMS first.
To switch off the R&S DVMS
1. Check the status displays on the front panel of the R&S DVMS. If the [REMOTE]
status display on the front panel is on, do not switch off the R&S DVMS. Someone
else is using the R&S DVMS by remote operation (see also Chapter 3.1.1, "Status
Display LEDs" , on page 13).
2. Shut down the R&S DVMS.
The R&S DVMS stores the current configuration settings automatically.
On the front panel, the LED under [INSTRUMENT READY] changes from green to
yellow.
3. Set the AC switch on the rear panel to the [O] position, or disconnect the
R&S DVMS from the AC power supply.
All LEDs on the front panel go out.
5.3 Checking the Provided Software Options
The R&S DVMS can be equipped with software options. To check whether the installed
options correspond to the options indicated on the delivery note, proceed as follows.
1. In the "Help" menu, select "Option Management".
A list with the software options is displayed.
2. Check the options enabled via license keys as indicated in the delivery note.
For an overview of the all options available for the R&S DVMS, see the Rohde &
Schwarz homepage ( www.rohde-schwarz.com/product/dvms ).
Checking the Provided Software Options