manualshive.com logo in svg

R&S CMW-KM5 Series, Руководство пользователя

Поделиться
Скачать
R&S CMW-KM5 Series Скачать руководство пользователя страница 97

LTE Signaling

R&S

®

CMW-KM5xx/-KS5xx

97

User Manual 1173.9628.02 ─ 16

Fig. 2-35: Event Log area of the main view

Event log entries

Each entry consists of a timestamp, an icon indicating the category of the event and a
short text describing the event.

Meaning of the category icons: 

 = information, warning and error

Remote command: 

SENSe:

​

LTE:

​

SIGN<i>:

​

ELOG:

​

LAST?

​

SENSe:

​

LTE:

​

SIGN<i>:

​

ELOG:

​

ALL?

​

2.4.1.3

UE Measurement Report

To display the measurement report information, select "UE Measurement Report" in
the field below the event log area.

The displayed information is retrieved from "measurement reports" provided by the
connected UE. The individual report values are defined in 3GPP TS 36.133.

To enable/disable measurement reports, use the checkbox.

Fig. 2-36: Measurement report in the main view

The minimized default presentation shows all measurement report values for the serv-
ing LTE cell.

To show also neighbor cell measurement results, press the button to the right. This
maximizes the area vertically.

To maximize the area also horizontally, press the button again.

 

GUI Reference

深圳德标仪器 

135-1095-0799

Содержание CMW-KM5 Series

























































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды