LTE Signaling
R&S
®
CMW-KM5xx/-KS5xx
368
User Manual 1173.9628.02 ─ 16
Firmware/Software:
V2.0.10
Manual operation:
See
Table 2-20: Maximum input value depending on channel bandwidth
Channel Bandwidth [MHz]
1.4
3
5
10
15
20
<total RB - 6>
0
9
19
44
69
94
CONFigure:LTE:SIGN<i>:CELL:PRACh:LRSindex
<LogRootSeqIndex>
Specifies the logical root sequence index to be used by the UE for generation of the
preamble sequence.
Parameters:
<LogRootSeqIndex> Range:
0 to 837
*RST:
123
Example:
See
Configuring Physical Cell Setup
Firmware/Software:
V2.0.10
Manual operation:
See
CONFigure:LTE:SIGN<i>:CELL:PRACh:ZCZConfig
<ZeroCorrZoneCon>
Specifies the zero correlation zone config.
Parameters:
<ZeroCorrZoneCon> Range:
0 to 15
*RST:
9
Example:
See
Configuring Physical Cell Setup
Firmware/Software:
V2.0.10
Manual operation:
See
2.6.13 Network Settings
The commands in this section configure parameters of the simulated radio network.
.......................................................................................... 369
...................................................................................... 377
.............................................................................................383
.........................................................................................387
.......................................................................................390
Command Reference
深圳德标仪器
135-1095-0799