LTE Signaling
R&S
®
CMW-KM5xx/-KS5xx
287
User Manual 1173.9628.02 ─ 16
Via the optional parameter <Index>, you can alternatively query the list for a single
CDMA2000 band class:
{used band: 1, 2, ..., 44, user-defined}
measured band <Index>
Query parameters:
<Index>
BC0 | BC1 | BC2 | BC3 | BC4 | BC5 | BC6 | BC7 | BC8 | BC9 |
BC10 | BC11 | BC12 | BC13 | BC14 | BC15 | BC16 | BC17
Selects the measured CDMA2000 band class, for which the list
shall be returned.
Return values:
<Value>
OFF | ON
Without <Index>: 18 x 45 = 810 values
With <Index>: 45 values
Example:
See
Querying UE Capability Report Contents
Usage:
Query only
Firmware/Software:
V2.1.30
V3.0.30: added band 44
V3.2.80: added <Index>
Manual operation:
See
SENSe:LTE:SIGN<i>:UECapability:MEAS:IFNGaps:V<number>?
[<Index>]
Returns a list of values indicating the need for downlink measurement gaps when oper-
ating on a specific E-UTRA band combination and measuring on a specific E-UTRA
band.
The full list contains 45 times n+1 values. Each block of 45 values corresponds to the
measured E-UTRA bands. Each repetition corresponds to a supported band combina-
tion.
The list is ordered as follows:
{measured band: 1, 2, ..., 44, user-defined}
used band combination 0
,
{measured band: 1, 2, ..., 44, user-defined}
used band combination 1
, ...,
{measured band: 1, 2, ..., 44, user-defined}
used band combination n
Via the optional parameter <Index>, you can alternatively query the list for a single
measured E-UTRA band:
{used combination: 0, 1, ..., n}
measured band <Index>
Suffix:
<number>
.
1020
Command Reference
深圳德标仪器
135-1095-0799