manualshive.com logo in svg

R&S CMW-KM5 Series, Руководство пользователя

Поделиться
Скачать
R&S CMW-KM5 Series Скачать руководство пользователя страница 156

LTE Signaling

R&S

®

CMW-KM5xx/-KS5xx

156

User Manual 1173.9628.02 ─ 16

Fig. 2-67: UE identity settings

Default IMSI

15-digit International Mobile Subscriber Identity (IMSI). The default IMSI is required for
mobile terminated connection setups without previous attach of the UE.

Remote command: 

CONFigure:

​

LTE:

​

SIGN<i>:

​

CELL:

​

UEIDentity:

​

IMSI

​

2.4.11.6

Timer and Constants

The parameters in this section configure timers and counters.

Fig. 2-68: Timer settings

Out of Sync

The "Out of Sync" timer specifies the time after which the instrument, having waited for
a signal from the connected UE, releases the connection. The timer is started when an
uplink grant message is sent to the UE.

Remote command: 

CONFigure:

​

LTE:

​

SIGN<i>:

​

CELL:

​

TOUT:

​

OSYNch

​

T3412

Timer "T3412" controls the initiation of a periodic tracking area update by the UE.

If the timer is disabled, no periodic tracking area update is required.

Remote command: 

CONFigure:

​

LTE:

​

SIGN<i>:

​

CELL:

​

TOUT:

​

T<no>

​

2.4.11.7

Time

The "Time" section allows you to send configurable date and time information to the
UE. Thus you can update the date and time displayed by the mobile. In a real network
this service is typically used to send the current local time to the UE.

The section is only visible if R&S CMW-KS510 is available.

 

 

GUI Reference

深圳德标仪器 

135-1095-0799

Содержание CMW-KM5 Series

























































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды