manualshive.com logo in svg

R&S CMW-KG4 Series, Руководство пользователя, Страница: 908 / 988

Поделиться
Скачать
R&S CMW-KG4 Series Скачать руководство пользователя страница 908

WCDMA Generator

R&S

®

CMW-KG4xx/-KM4xx/-KS4xx

908

User Manual 1173.9657.02 ─ 11

The following rule has to be observed for assignment of channelization codes in order
to avoid code conflicts: Within each branch only one code can be used at the same
time.

This means:

●

Other codes on the path between the code and the root of the tree must not be
used.

●

Codes in sub-branches of the code (to the right of the code) must not be used.

For an example see the figure below. The red parts are blocked when c

4,3

 is used.

6.2.2 Channel Structure

The following sections describe the structure of most physical channels. For an over-
view of the channels refer to 

chapter 6.2.1, "Physical Channel Overview"

, 

on page 904.

●

SCH and P-CCPCH

.............................................................................................. 909

●

Secondary Common Control Physical Channel (S-CCPCH)

................................ 909

●

Paging Indicator Channel (PICH)

..........................................................................911

●

Dedicated Physical Channel (DPCH)

....................................................................911

●

Fractional Dedicated Physical Channel (F-DPCH)

............................................... 912

●

HS-PDSCH and HS-SCCH

...................................................................................913

●

E-AGCH, E-RGCH and E-HICH

............................................................................913

 

General Description

深圳德标仪器 

135-1095-0799

Содержание CMW-KG4 Series





























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов