manualshive.com logo in svg

R&S CMW-KG4 Series, Руководство пользователя, Страница: 843 / 988

Поделиться
Скачать
R&S CMW-KG4 Series Скачать руководство пользователя страница 843

WCDMA TPC Measurement

R&S

®

CMW-KG4xx/-KM4xx/-KS4xx

843

User Manual 1173.9657.02 ─ 11

Usage: 

Query only

Firmware/Software: 

V2.1.20
V3.2.70: command renamed (

CARRier<c>

 added)

For additional information concerning syntax elements and returned values refer to

Conventions and General Information

.

FETCh:WCDMa:MEAS<i>:TPC:TOTal:UEPower:STATistics?
READ:WCDMa:MEAS<i>:TPC:TOTal:UEPower:STATistics?

Return the "Statistics" values, indicating how many trace values have been considered
to derive the maximum, minimum and average values of the maximum output power
over all carriers.

Return values: 

<Reliability>

Reliability Indicator

<MaxOutputPower> Number of trace values for maximum output power over all carri-

ers
Range: 

0  to  341

Example: 

See 

Performing Measurements

Usage: 

Query only

Firmware/Software: 

V3.2.70

For additional information concerning syntax elements and returned values refer to

Conventions and General Information

.

FETCh:WCDMa:MEAS<i>:TPC:CARRier<c>:PSTeps:STATistics?
READ:WCDMa:MEAS<i>:TPC:CARRier<c>:PSTeps:STATistics?

Return the "Statistics" values per carrier, indicating how many trace values have been
considered to derive the maximum, minimum and average power step and power step
group results.

The command returns all parameters listed below, independent of the selected TPC
setup. However, only for some of the parameters result values are available. For the
other parameters only an indicator is returned (e.g. NAV).

"Step A" to "step H" refer to the test steps of the "Inner Loop Power Control" mode
(result <2_Step0dB_ABC> to <9_GroupFH>).

The number to the left of each result parameter is provided for easy identification of the
parameter position within the result array.

Suffix: 

<c>

.

1..2
Selects the carrier to be queried - only relevant for dual carrier
HSUPA

Return values: 

<1_Reliability>

Reliability Indicator

Command Reference

深圳德标仪器 

135-1095-0799

Содержание CMW-KG4 Series





























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов