WCDMA Multi Evaluation Measurement
R&S
®
CMW-KG4xx/-KM4xx/-KS4xx
754
User Manual 1173.9657.02 ─ 11
Usage:
Query only
Firmware/Software:
V1.0.5.3
Options:
R&S CMW-KM012
FETCh:WCDMa:MEAS<i>:MEValuation:LIST:UEPower:CURRent?
Returns the UE power vs. slot results in list mode.
Return values:
<Reliability>
In list mode, a zero reliability indicator indicates that the results
in all measured segments are valid. A non-zero value indicates
that an error occurred in at least one of the measured segments.
{<UEpower_1> ...
<UEpower_m>}
User equipment power, one value per slot. The list contains
results for all active segments (segments for which any mea-
surement has been enabled).
If another measurement has been enabled for a segment, but
the UE power vs. slot measurement is disabled, NCAPs are
returned for that segment.
Example: segment 1 with 10 slots active, segment 2 with 50
slots inactive, segment 3 with 12 slots active. 22 power results
are returned.
Range:
-100 dBm to 55 dBm
Default unit: dBm
Example:
See
Usage:
Query only
Firmware/Software:
V1.0.10.1
Options:
R&S CMW-KM012
FETCh:WCDMa:MEAS<i>:MEValuation:LIST:PHD:CURRent?
Returns the phase discontinuity vs. slot results in list mode.
Each value indicates the phase discontinuity at the boundary between the slot and the
previous slot. If the slot or the previous slot is not measured, NCAP is returned.
Return values:
<Reliability>
In list mode, a zero reliability indicator indicates that the results
in all measured segments are valid. A non-zero value indicates
that an error occurred in at least one of the measured segments.
Command Reference
深圳德标仪器
135-1095-0799