WCDMA Multi Evaluation Measurement
R&S
®
CMW-KG4xx/-KM4xx/-KS4xx
752
User Manual 1173.9657.02 ─ 11
<4_ACLRminus2>
<5_ACLRminus1>
<6_ACLRplus1>
<7_ACLRplus2>
Power of the adjacent channels (±1
st
adjacent channels at ±5
MHz from the UL frequency, ±2
nd
adjacent channels at ±10 MHz
from the UL frequency)
Range:
-100 dBm to 55 dBm
Default unit: dBm
<8_OBW>
Occupied bandwidth
Range:
0 MHz to 10 MHz
Default unit: Hz
<9_MarginAB>
<10_MarginBC>
<11_MarginCD>
<12_MarginEF>
<13_MarginFE>
<14_MarginDC>
<15_MarginCB>
<16_MarginBA>
Limit line margin values in the 8 emission mask areas. A positive
result indicates that the trace is located above the limit line, i.e.
the limit is exceeded.
Range:
-100 dB to 90 dB
Default unit: dB
<17_UEpower>
User equipment power
Range:
-100 dBm to 55 dBm
Default unit: dBm
<18_MarginHAD>
<19_MarginHDA>}
Limit line margin values for limit line H. A positive result indicates
that the trace is located above the limit line, i.e. the limit is
exceeded.
Range:
-130 dB to 130 dB
Default unit: dB
Example:
See
Usage:
Query only
Firmware/Software:
V1.0.10.1
V3.2.70: added
<ACLRMode>
Options:
R&S CMW-KM012
FETCh:WCDMa:MEAS<i>:MEValuation:LIST:MODulation:CURRent?
FETCh:WCDMa:MEAS<i>:MEValuation:LIST:MODulation:AVERage?
FETCh:WCDMa:MEAS<i>:MEValuation:LIST:MODulation:MAXimum?
FETCh:WCDMa:MEAS<i>:MEValuation:LIST:MODulation:SDEViation?
Return modulation single value results in list mode.
The values listed below in curly brackets {} are returned for the segments {...}
seg 1
,
{...}
seg 2
, ..., {...}
seg n
.
The number to the left of each result parameter is provided for easy identification of the
parameter position within the result array.
Command Reference
135-1095-0799