manualshive.com logo in svg

R&S CMW-KG4 Series, Руководство пользователя, Страница: 731 / 988

Поделиться
Скачать
R&S CMW-KG4 Series Скачать руководство пользователя страница 731

WCDMA Multi Evaluation Measurement

R&S

®

CMW-KG4xx/-KM4xx/-KS4xx

731

User Manual 1173.9657.02 ─ 11

<13_UE Power>

User equipment power
Range: 

-100 dBm  to  55 dBm

Default unit: dBm

Example: 

See 

Using WCDMA List Mode

Usage: 

Query only

Firmware/Software: 

V1.0.5.3
V3.2.10: increased number of segments

Options: 

R&S CMW-KM012

FETCh:WCDMa:MEAS<i>:MEValuation:LIST:SEGMent<no>:UEPower:CURRent?

Returns the UE power vs. slot results for segment <no> in list mode.

Suffix: 

<no>

.

1..1000

Return values: 

<Reliability>

Reliability Indicator

In list mode, a zero reliability indicator indicates that the results
in all measured segments are valid. A non-zero value indicates
that an error occurred in at least one of the measured segments.

<ReturnCode>

Reliability indicator for the segment. The meaning of the
returned values is the same as for the common reliability indica-
tor, see previous parameter.

<UEpower>

User equipment power, one value per slot. The list contains
results for the indicated segment <no>.
If another measurement has been enabled for a segment, but
the UE power vs. slot measurement is disabled, NCAP is
returned.
Range: 

-100 dBm  to  55 dBm

Default unit: dBm

Example: 

See 

Using WCDMA List Mode

Usage: 

Query only

Firmware/Software: 

V3.2.60

Options: 

R&S CMW-KM012

FETCh:WCDMa:MEAS<i>:MEValuation:LIST:SEGMent<no>:PHD:CURRent?

Returns the phase discontinuity vs. slot results for segment <no> in list mode.

Each value indicates the phase discontinuity at the boundary between the slot and the
previous slot. If the slot or the previous slot is not measured, NCAP is returned.

Suffix: 

<no>

.

1..1000

Command Reference

深圳德标仪器 

135-1095-0799

Содержание CMW-KG4 Series





























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов