manualshive.com logo in svg

R&S CMW-KG4 Series, Руководство пользователя, Страница: 727 / 988

Поделиться
Скачать
R&S CMW-KG4 Series Скачать руководство пользователя страница 727

WCDMA Multi Evaluation Measurement

R&S

®

CMW-KG4xx/-KM4xx/-KS4xx

727

User Manual 1173.9657.02 ─ 11

The number to the left of each result parameter is provided for easy identification of the
parameter position within the result array.

Suffix: 

<no>

.

1..1000

Return values: 

<1_Reliability>

Reliability Indicator

In list mode, a zero reliability indicator indicates that the results
in all measured segments are valid. A non-zero value indicates
that an error occurred in at least one of the measured segments.

<2_ReturnCode>

Reliability indicator for the segment. The meaning of the
returned values is the same as for the common reliability indica-
tor, see previous parameter.

<3_DPCCH>
<4_DPDCH>
<5_HSDPCCH>
<6_EDPCCH>
<7_EDPDCH1>
<8_EDPDCH2>
<9_EDPDCH3>
<10_EDPDCH4>

RMS CDP values for the indicated channels
Range: 

-100 dB to 0 dB (SDEViation 0 dB to 50 dB)

Default unit: dB

Example: 

See 

Using WCDMA List Mode

Usage: 

Query only

Firmware/Software: 

V1.0.5.3
V3.2.10: increased number of segments

Options: 

R&S CMW-KM012
R&S CMW-KM401 for HS-DPCCH, E-DPCCH, E-DPDCH

FETCh:WCDMa:MEAS<i>:MEValuation:LIST:SEGMent<no>:CDERror:CURRent?
FETCh:WCDMa:MEAS<i>:MEValuation:LIST:SEGMent<no>:CDERror:AVERage?
FETCh:WCDMa:MEAS<i>:MEValuation:LIST:SEGMent<no>:CDERror:MAXimum?
FETCh:WCDMa:MEAS<i>:MEValuation:LIST:SEGMent<no>:CDERror:

SDEViation?

Returns the RMS CDE vs. slot results for segment <no> in list mode.

The number to the left of each result parameter is provided for easy identification of the
parameter position within the result array.

Suffix: 

<no>

.

1..1000

Return values: 

<1_Reliability>

Reliability Indicator

In list mode, a zero reliability indicator indicates that the results
in all measured segments are valid. A non-zero value indicates
that an error occurred in at least one of the measured segments.

Command Reference

深圳德标仪器 

135-1095-0799

Содержание CMW-KG4 Series





























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов