R&S AREG800A, Руководство пользователя

Страница: 234 / 411

Network operation and remote control
R&S
®
AREG800A
234 User Manual 1179.3615.02 ─ 01
a) To retrace your settings in manual operation, open the context-sensitive menu
and select "Mark all parameters changed from preset".
The function identifies all settings you have changed, both in the block dia-
gram, and in the dialogs. They appear orange.
b) Check whether there is a command in the list for all modified settings.
5. To perform modifications, export the list to a PC, using for example a USB flash
drive.
10.9.5 How to convert and save SCPI lists
After completing the recording, the "SCPI Recording Export" dialog opens.
1. Select the "Format" for the command syntax in which you want to save the list.
2. "Select Code Template"
Depending on the selected format, proceed accordingly:
Note: Select the code template before exporting.
a) Plain SCPI
Continue with the next step.
b) Predefined code generator
The "SCPI Recording Export - Select Predefined Code Template" dialog opens.
Select one of the predefined code templates.
c) User code generator
A file system ("SCPI Recording Export - Select User Code Template") dialog
opens.
Select your user-defined code template. The code template must have file
extension
*.expcodetmpl
.
3. Select "File..."
The "SCPI Recording Export - Select Output File" dialog opens.
4. Select "New" and assign a filename for saving the recorded list.
5. In the "SCPI Recording Export" dialog, select "Export".
Saves the recorded data either in ASCII format (plain SCPI), or in the correspond-
ing format of the used code template, and shows the SCPI list in the "File Content"
section.
10.9.6 How to find out the SCPI commands for GUI functions
Finding out the SCPI command using "Show SCPI Command"
1. To find out the SCPI command of a parameter in manual operation, select the
respective parameter.
2. Open the context-sensitive menu and select "Show SCPI command"
Automating tasks with remote command scripts