R&S AREG800A, Начало работы

Страница: 28 / 64

Preparing for use
R&S
®
AREG800A
28 Getting Started 1179.3609.02 ─ 02
Table 4-3: Overview of power states
State LED Position of power switch
Off
gray
[0]
Standby
orange
[I]
Ready
green
[I]
To switch on the R&S AREG800A
The R&S AREG800A is off but connected to power. See Chapter 4.6, "Connect-
ing to power" , on page 20.
1. Set the switch on the power supply to position [I].
The switch is located on the rear panel .
The LED of the [On/Standby] key is orange.
2. Press the [On/Standby] key.
Key and LED are located on the front panel .
The LED changes to green. The R&S AREG800A boots.
When starting for the first time, the R&S AREG800A starts with the default
settings. When restarting the instrument, the settings depend on the instru-
ment configuration before shut-down.
See the chapter "Saving and Recalling Instrument Settings" in the user man-
ual.
When the instrument is switched on, it automatically monitors main functions. You
can query erroneous functions. In addition to automatic monitoring, you can per-
form maintenance tasks.
See:
●
Chapter "Querying Error Messages" in the user manual.
●
Chapter "Performing Maintenance Tasks" in the user manual.
To shut down the product
The product is in the ready state.
► Press the [On/Standby] key.
The operating system shuts down. The LED changes to orange.
Switching on or off