R&S 1424.7005.02, Руководство пользователя

Страница: 66 / 514

Configuration for All Measurement Types
R&S
®
NRX
66 User Manual 1178.5566.02 ─ 07
6.4 Measurement Settings Dialog
Access: In the main measurement dialog, tap the displayed measurement value or
graphic . See also "Layout of the main measurement dialog" on page 33.
In this dialog, you select the measurement type and the channel calculation function.
Based on the selected measurement and function, you can assign one or two sensors.
The assigned sensors are called primary sensor and secondary sensor.
The functions described here apply to the continuous average, burst average, trace,
pulse analysis, time gate, timeslot. For the other measurements, see:
●
Statistics: Chapter 7.7.3, "Measurement Settings Dialog" , on page 102
●
NRT: Chapter 7.8.3, "Measurement Main Configuration Dialog" , on page 111
For configuring the assigned power sensors, see:
●
Quick Setup
●
Chapter 8, "Sensor Configuration" , on page 113
Figure 6-3: Example: continuous average
Measurement Type ....................................................................................................... 67
Primary Sensor, Secondary Sensor ..............................................................................67
Primary Sensor Config, Secondary Sensor Config ....................................................... 67
Channel Calculation Function ....................................................................................... 67
Quick Setup ...................................................................................................................68
└ Parameter Set .................................................................................................68
└ Auto Set .......................................................................................................... 68
└ Preserve Window Settings ..............................................................................68
└ Recall Parameter Set ......................................................................................69
Measurement Settings Dialog
www.allice.de Allice Messtechnik GmbH