Page
1
of
15
IA0004
R&G
Unit
1
, Shelley’s Lane, East Worldham, Alton, Hampshire, GU34 3AQ
Tel: +44 (0)
1
420 89007 Fax: +44 (0)
1
420 8730
1
Email:
FITTING INSTRUCTIONS FOR IA0004 INDICATOR ADAPTORS
HUSQVARNA VITPILEN 701 2018 –
THIS KIT CONTAINS THE ITEMS PICTURED AND LABELLED BELOW.
DO NOT PROCEED UNTIL YOU ARE SURE ALL PARTS ARE PRESENT.
Please note that the way the kit is packed does not necessarily represent the way of mounting to the bike
Please note that in cases where kits are packed with rubber washers holding the components onto the bolt –
the rubber washers should be thrown
away
!
T
HE PARTS SHOWN MAY BE REPRESENTATIVE ONLY
(
FOR CLARITY OF INSTRUCTIONS ONLY
)
Digital copies of these instructions are available to download from
GENERAL TORQUE SETTINGS
M4 BOLT = 8Nm
M5 BOLT =
1
2Nm
M6 BOLT =
1
5Nm
M8 BOLT = 20Nm
M
1
0 BOLT = 40Nm
TOOLS REQUIRED
•
Ratchet set with T20 and T30 (or 8mm Hex) Torx Sockets
•
1
3mm Spanner
This Kit Contains:
Item
1
= 2x Indicator Wiring Connector (CON0014)
