1055 Mendell Davis Drive, Jackson, MS 39272
888-994-7636, fax 888-266-5244
Information contained in this document is known to be current and accurate at the time
of printing/creation. Unified Brands recommends referencing our product line websites,
unifiedbrands.net, for the most updated product information and specifications.
model
CR9039 CR9046 CR9053 CR9060 CR9067 CR9074 CR9080
CR9087 CR9099
4” leg set
Export voltages available
Exclusive Hood & cover Assembly
Preparation Table
Countertop Rail
model CR9000
Description:
Available in nine convenient sizes, 39”, 46”, 53”, 60”, 67”, 74”,
80”, 87” & 99”. The CR9000 Series takes the best of condiment
cooling designs from our 8000 Series Preparation Table and makes
them available in a counter top design. These counter top rails offer
the option of converting existing work surfaces into pan holding
operations in compliance with the NSF/ANSI standard 7, 41˚ F. pan
product temperatures. Our rail design is proven by over 12 years of
wrapped coldwall construction experience.
Specifications:
UNIT CONSTRUCTION: Exterior front, sides and top are constructed
of 18 gauge stainless steel. The raised refrigerated rail will be
mechanically cooled and shall be provided with one opening to
allow flexible pan configurations. The interior of the rail will be one
piece stainless steel with coved corners for easy wipe out. Rail
will hold standard 6” deep pans - supplied by others. Unit bottom
is galvanized metal. A mechanical housing is mounted on the end
with a stainless steel removable air flow cover.
REFRIGERATION SYSTEM: Designed with R-134A refrigerant,
this coldwall constructed unit is provided with a self-contained
refrigeration system. A exterior mounted on/off switch is provided
as standard to allow the rail to be shut off for defrosting and non-
use times.
ELECTRICAL: Units will be provided with a 8’ power cord and 3-
wire grounded plug as standard, pre-wired for 115 volt, 60 hertz,
single phase operation. Export voltages are available and require
hard wiring in the field to the units main junction box.
This equipment is intended for use in rooms having an ambient
temperature of 86˚F (30˚C) or less.
Standard Features:
• Meets 1998 NSF Standard 7 41˚ F Product Temperature
Requirements
• Recessed Wrapped Coldwall Rail with Exclusive
Temperature Control
Randell Preparation Table, Page 8
Revised 07/06
Options & Accessories:
model CR9060 shown
with optional hood
