SALES
@
RBWIRE.COM (800) 634-0555 RBWIRE.COM
ASSEMBLY INSTRUCTIONS
R
STEP
1
STEP
2
TOOLS REQUIRED:
(2) 7/16 wrenches or sockets
(1) Large flathead screwdriver
1 person assembly
Set base upside down with legs pointing up to install
casters. Place raceway cover onto caster stem and insert
caster stem into base leg. While holding raceway cover
up against caster, insert a hex head bolt into each leg
hole, and secure with nuts facing toward inside of unit.
Repeat with remaining casters.
NOTE:
Although this instruction sheet depicts the 100 series cart,
it also applies to the 100, 200, 201 and 350 series.
Place basket on base and align holes in bottom of
basket with holes in top of base. Insert flathead bolts
through hole in basket and through base, and secure
with nuts. Tighten until bolt head engages nylon lock
on nut.
NOTE:
Your laundry cart is assembled and ready for use. If you purchased
the Single Pole Rack or Double Pole Rack accessories, continue to page 2.
W
ARN
IN
G
!
100, 200, 201, 350 SERIES
Wire Cart
· Never allow children or adults to ride in or on
cart, as it can cause serious injury or death.
· Be sure casters roll freely and turn easily.
· Place all loads in center of basket for balance.
HARDWARE INCLUDED
(Not to scale)
x4
Raceway covers
x12
Nuts
x4
Flathead bolts
x8
Hex bolts
