RAMPAGE
P
R
O
D
U
C
T
S
14301 bracket installation
Jeep JK 4 door, 2007-
NOTE: Before installation please read and understand these instructions. Please be sure all
of the components are included in the package. Please be sure to have a helper to assist you
for the initial installation of the step assemblies.
(6x) 8mm bolts
(6x) 8mm ID washer
(24x) 6mm ID washer
(12x) 6mm bolts
(12x) 6mm nut
(6 x) U Bracket
Left side brackets
Right side brackets
(4x) 8mm Pinch clip
Parts List
Ratchet wrench with extension
10mm socket
10mm wrench
13mm socket
Tools Required
Thank You for purchasing this product!
Preperation
If the vehicle had factory step or rocker guard on it the pinch
clips will be installed on the floor of the vehicle already. If it did
not then they will need to be installed in the openings under the
vehicle as shown. Look for the square holes with a round hole
next to it. These mounting locations will require the pinch clips.
Slip them into the square holes and onto the round hole as
shown to the right.
(4x) 8mm Pinch clip
Vehicle floor
Vehicle floor
(4x) 8mm bolts
