RAM PROMASTER CITY, Руководство пользователя

Страница: 36 / 280

34 GETTING TO KNOW YOUR VEHICLE
Outside Air Intake
Make sure the air intake, located directly in
front of the windshield, is free of obstructions,
such as leaves. Leaves collected in the air
intake may reduce airflow, and if they enter the
air distribution box, they could plug the water
drains. In Winter months, make sure the air
intake is clear of ice, slush, and snow.
Cabin Air Filter
The Climate Control system filters out dust and
pollen from the air. Contact an authorized
dealer to service your cabin air filter, and to
have it replaced when needed.
Operating Tips Chart
CAUTION!
Failure to follow these cautions can cause
damage to the heating elements:

Use care when washing the inside of the
rear window. Do not use abrasive window
cleaners on the interior surface of the
window. Use a soft cloth and a mild
washing solution, wiping parallel to the
heating elements. Labels can be peeled off
after soaking with warm water.

Do not use scrapers, sharp instruments, or
abrasive window cleaners on the interior
surface of the window.

Keep all objects a safe distance from the
window.
WEATHER
CONTROL
SETTINGS
Hot Weather And
Vehicle Interior Is Very
Hot
Set the mode control
to (Panel Mode),
(A/C) on, and
blower on high. Roll
down the windows for
a minute to flush out
the hot air. Adjust the
controls as needed to
achieve comfort.
Warm Weather
Turn (A/C) on and
set the mode control
to the (Panel
Mode) position.
Cool Sunny
Operate in
(Bi-Level Mode)
position.
Cool & Humid
Conditions
Set the mode control
to (Mix Mode)
position and turn on
(A/C) to keep
windows clear.
Cold Weather
Set the mode control
to the (Floor Mode)
position. If windshield
fogging starts to
occur, move the
control to the (Mix
Mode) position.
WEATHER
CONTROL
SETTINGS
21_VM_OM_EN_USC_t.book Page 34