RAM CHASSIS CAB 2024, Руководство пользователя

Страница: 335 / 360

TECHNICAL SPECIFICATIONS
VEHICLE IDENTIFICATION NUMBER (VIN)
The VIN is found on the left front corner of the instru-
ment panel, visible through the windshield.
NOTE:
It is illegal to remove or alter the VIN.
BRAKE SYSTEM
If power assist is lost for any reason (for example, repeated
brake applications with the engine off), the brakes will still
function. However, you will experience a substantial
increase in braking effort to stop the vehicle.
If either the front or rear hydraulic system loses normal
braking capability, the remaining system will still function
with some loss of overall braking effectiveness. This will be
evident by increased pedal travel during application,
greater pedal force required to slow or stop, and activation
of the Brake Warning Light and/or the Anti-Lock Brake Sys-
tem (ABS) Warning Light during brake use.
HYDRAULIC BRAKE ASSIST —
IF EQUIPPED
The brake system power assist is provided by a hydro-boost
unit which shares fluid with the power steering system. You
may experience some clicking or hissing noises from the
hydro-boost system during hard braking conditions.
NOTE:
Under cold temperatures, pedal effort will be higher
than normal until the power steering fluid reaches oper-
ating temperature.
WHEEL AND TIRE TORQUE SPECIFICATIONS
Proper lug nut/bolt torque is very important to ensure
that the wheel is properly mounted to the vehicle. Any
time a wheel has been removed and reinstalled on the
vehicle, the lug nuts/bolts should be torqued using a
properly calibrated torque wrench using a six-sided
(hex) deep wall socket.
TORQUE SPECIFICATIONS
Lug Nut/
Bolt Torque Lug Nut/
Bolt Type **Lug Nut/
Bolt Size
Lug Nut/
Bolt Socket
Size
130 ft-lb
(176 N·m)
Cone
M14 x 1.50 22 mm
129 ft-lb
(175 N·m)
Flanged
**Use only authorized dealer recommended lug nuts/
bolts and clean or remove any dirt or oil before
tightening.
Inspect the wheel mounting surface prior to mounting
the tire and remove any corrosion or loose particles.
NOTE:
Dual wheels are flat mounted, center piloted. The lug
nuts are a two-piece assembly. When the tires are
being rotated or replaced, clean these lug nuts at the
interface between the lug nut/bolt and the washer.
Do
not oil wheel studs.
Vehicle Identification Number
Two-Piece Lug Nut
333
9