RAM CHASSIS CAB 2024, Руководство пользователя

Страница: 316 / 360

FOG LAMPS — IF EQUIPPED
Halogen
See the following steps to replace:
1. Reach under and behind the front fascia/bumper to
access the back of the front fog lamp housing.
2. Disconnect the fog lamp wiring harness connector
from the fog lamp bulb.
3. Rotate the bulb counterclockwise a quarter turn to
unlock the bulb from the housing.
4. Pull the bulb straight out from the housing.
5. Reverse the procedure to install the bulb and cover.
CAUTION!
Do not contaminate the bulb glass by touching it with
your fingers or by allowing it to contact other oily sur-
faces. Shortened bulb life will result.
CENTER HIGH MOUNTED STOP LAMP
(CHMSL) WITH CARGO LAMP
See the following steps to replace:
1. Remove the two screws holding the housing/lens to
the body as shown.
2. Separate the connector holding the housing and
wiring harness to the body.
3. Turn the desired bulb socket a quarter turn and
remove the socket and bulb from housing.
4. Pull the desired bulb straight from the socket.
CAUTION!
Do not contaminate the bulb glass by touching it with
your fingers or by allowing it to contact other oily sur-
faces. Shortened bulb life will result.
○
Outside Bulbs: Cargo Lamps
○
Inside Bulb: Center High Mounted Stop Lamp
5. Reverse the procedure for installation of bulbs and
housing.
CAB TOP CLEARANCE LAMPS — IF EQUIPPED
See the following steps to replace:
1. Remove the two screws from the top of the lamp.
Fog Lamp Bulb
CHMSL Mounting Screw Locations
CHMSL Connector Location
Removing Rear Screw From Clearance Lamp
314 SERVICING AND MAINTENANCE