412
MULTIMEDIA
Uconnect 4/4C/4C NAV Settings
Uconnect 4/4C/4C NAV With 8.4–inch Display
Buttons On The Touchscreen And Buttons On
The Faceplate
Press the “Apps” button on the touchscreen
then press the “Settings” button on the
touchscreen to display the settings menu
screen. In this mode the Uconnect system
allows you to access programmable features
that may be equipped such as Language,
Display, Units, Voice, Clock, Safety & Driving
Assistance, Mirrors & Wipers, Lights, Doors &
Locks, Power Side Steps (if equipped), Auto-On
Comfort (if equipped), Engine Off Options,
Suspension, Trailer, Audio, Phone/Bluetooth,
SiriusXM Setup (if equipped), Restore Settings
and System Information.
NOTE:
Only one category may be selected at a time.
When making a selection, press the button on
the touchscreen to enter the desired mode.
Once in the desired mode, press and release
the preferred setting until a check-mark
appears next to the setting, showing that setting
has been selected. Once the setting is
complete, press the back arrow button on the
touchscreen to return to the previous menu or
press the “X” button on the touchscreen to
close out of the settings screen. Pressing the Up
or Down Arrow buttons on the touchscreen on
the right side of the screen will allow you to
toggle up or down through the list of available
settings.
NOTE:
All settings should be changed with the ignition
in the RUN position.
1 — Uconnect Buttons On The Touchscreen
2 — Uconnect Buttons On The Faceplate
19_DJD2_OM_EN_USC_t.book Page 412
