RAM 2500 2023, Руководство пользователя

Страница: 343 / 468

SAFETY 341
Installing A Child Restraint With A
Switchable Automatic Locking Retractor
(ALR):
Child restraint systems are designed to be secured in
vehicle seats by lap belts or the lap belt portion of a
lap/shoulder belt.
1. For Mega And Crew Cab Models
Place the child seat in the center of the seating posi -
tion. If the second row seat can be reclined, you may
recline the seat and/or raise the head restraint (if ad -
justable) to get a better fit. If the rear seat can be
moved forward and rearward in the vehicle, you may
wish to move it to its rear-most position to make room
for the child seat. You may also move the front seat
forward to allow more room for the child seat.
For Regular Cab Models
Place the child seat in the center of the seating posi
-
tion. Move the vehicle seat as far rearward as possi -
ble to keep the child as far from the passenger air bag
as possible.
2. Pull enough of the seat belt webbing from the
retractor to pass it through the belt path of the child
restraint. Do not twist the belt webbing in the belt
path.
3. Slide the latch plate into the buckle until you hear a
“click.”
4. Pull on the webbing to make the lap portion tight
against the child seat.
5. To lock the seat belt, pull down on the shoulder part
of the belt until you have pulled all the seat belt
webbing out of the retractor. Then, allow the webbing
to retract back into the retractor. As the webbing
retracts, you will hear a clicking sound. This means
the seat belt is now in the Automatic Locking mode.
6. Try to pull the webbing out of the retractor. If it is
locked, you should not be able to pull out any
webbing. If the retractor is not locked, repeat step 5.
7. Finally, pull up on any excess webbing to tighten the
lap portion around the child restraint while you push
the child restraint rearward and downward into the
vehicle seat.
Can the rear head restraints be removed? Yes
The head restraints can be removed in
every rear seating position if they interfere
with the installation of the child restraint
Ú
page 36.
Can the buckle stalk be twisted to tighten
the seat belt against the belt path of the
child restraint?
Yes – Cinching Latch Plate
No – ALR
In positions with cinching latch plates
(CINCH), the buckle stalk may be twisted up
to 3 full turns. Do not twist the buckle stalk
in a seating position with an ALR retractor.
Frequently Asked Questions About Installing Child Restraints With Seat Belts
WARNING!

Improper installation or failure to properly secure a
child restraint can lead to failure of the restraint.
The child could be badly injured or killed.

Follow the child restraint manufacturer’s directions
exactly when installing an infant or child restraint.
6
23_DJD2_OM_EN_USC_t.book Page 341