RAM 2500 2023, Руководство пользователя

Страница: 228 / 468

226 MULTIMEDIA
UCONNECT SETTINGS
The Uconnect system uses a combination of buttons on
the touchscreen and buttons on the faceplate located on
the center of the instrument panel. These buttons allow
you to access and change the Customer Programmable
Features. Many features can vary by vehicle.
Buttons on the faceplate are located below and/or beside
the Uconnect system in the center of the instrument
panel. In addition, there is a SCROLL/ENTER control knob
located on the right side. Turn the control knob to scroll
through menus and change settings. Push the center of
the control knob one or more times to select or change a
setting.
Your Uconnect system may also have SCREEN OFF and
MUTE buttons on the faceplate.
Push the SCREEN OFF button on the faceplate to turn off
the Uconnect screen. Push the button again or tap the
screen to turn the screen on.
Press the Back Arrow button to exit out of a Menu or
certain option on the Uconnect system.
For the Uconnect 5 systems, push and hold the
Power button on the radio’s faceplate for a minimum of
15 seconds to reset the radio.
C
USTOMER
P
ROGRAMMABLE
F
EATURES
Uconnect 5 NAV With 12-inch Display Touchscreen And
Faceplate Buttons
For The Uconnect 3 With 5-inch Display, The Uconnect
5/5 NAV With 8.4-inch Display, And The Uconnect 5 NAV
With 12-inch Display
For Uconnect 3, push the SETTINGS button on the side of
the faceplate. In this menu, the Uconnect system allows
you to access all of the available programmable features.
For Uconnect 5, press the Vehicle button on the
touchscreen, then press the Settings tab on the top of the
touchscreen. In this menu, the Uconnect system allows
you to access all of the available programmable features.
NOTE:

Only one touchscreen area may be selected at a time.

Depending on the vehicle’s options, feature settings
may vary.
When making a selection, press the button on the
touchscreen to enter the desired menu. Once in the
desired menu, press and release the preferred setting
option until a check mark appears next to the setting,
showing that setting has been selected. Once the setting
is complete, press the Vehicle button to exit to the screen.
Pressing the Up or Down Arrow button on the right side of
the screen will allow you to toggle up or down through the
available settings.
1 — Uconnect Buttons On The Touchscreen
2 — Uconnect Buttons On The Faceplate
23_DJD2_OM_EN_USC_t.book Page 226