RAM 2500 2019, Руководство пользователя

Страница: 52 / 332

GETTING TO KNOW YOUR VEHICLE
50
TAILGATE
Opening
The power tailgate may be opened by
pushing the tailgate release pad located on
the tailgate door.
The tailgate damper strut will lower the tail -
gate to the open position (if equipped).
Electronic Tailgate Release — If Equipped
The key fob may be equipped with
an electronic release feature for the
tailgate, allowing hands-free tail
-
gate opening. To activate, push and
release the Tailgate Release button on the
key fob twice within five seconds. The tail
-
gate door will unlatch, and slowly lower into
the open position.
If equipped, a button on the center overhead
console inside the vehicle can be used to
release the tailgate. An indicator light may
also signal when the tailgate is open (if
equipped).
NOTE:
The Tri-Fold Tonneau Cover (if equipped)
may prevent Electronic Tailgate Release if
installed. The Tonneau Cover must be
removed or folded up before releasing the
tailgate. Refer to “Tri-Fold Tonneau Cover —
If Equipped” in “Getting To Know Your
Vehicle” in the Owner’s Manual for further
information.
Closing
To close the tailgate, push it upward until
both sides are latched.
NOTE:
Pull back on the tailgate firmly after closing
to ensure it is securely latched.
GARAGE DOOR OPENER —
IF EQUIPPED
HomeLink replaces up to three hand-held
transmitters that operate devices such as
garage door openers, motorized gates,
lighting or home security systems. The
HomeLink unit is powered by your vehicles
12 Volt battery.
The HomeLink buttons that are located on
the sun visor designate the three different
HomeLink channels.
HomeLink Buttons
NOTE:
HomeLink is disabled when the Vehicle
Security Alarm is active.
CAUTION!
To prevent possible damage, do not slam
the hood to close it. Use a firm downward
push at the front center of the hood to
ensure that both latches engage.
2019_RAM_2500_3500_UG_USA=GUID-8BBFE451-BF24-4E82-808A-AE2460D39A05=1=en=.book Page 50