RAM 2015 1500, Руководство по эксплуатации, Страница: 208 / 998

Customer Programmable Features
— Uconnect® 8.4A/8.4AN Personal
Settings
Press the “Settings” button on the touchscreen
(if equipped) or press the “Controls” button on
the touchscreen then press the “Settings” but-
ton on the touchscreen to display the settings
menu screen. In this mode the Uconnect®
system allows you to access programmable
features that may be equipped such as Display,
Voice, Clock, Safety & Driving Assistance,
Lights, Doors & Locks, Auto-On Comfort (if
equipped), Engine Off Options, Suspension,
Trailer Brake, Audio, Phone/Bluetooth®, Radio
Setup, Restore Settings and Clear Personal
Data and System Information.
NOTE:
Only one category may be selected at a time.
When making a selection, press the button on
the touchscreen to enter the desired mode.
Once in the desired mode, press and release
the preferred setting until a check-mark appears
next to the setting, showing that setting has
been selected. Once the setting is complete,
either press the back arrow button on the touch-
screen or the Back button on the faceplate to
return to the previous menu or press the “X”
button on the touchscreen to close out of the
settings screen. Pressing the Up or Down Arrow
buttons on the touchscreen on the right side of
the screen will allow you to toggle up or down
through the list of available settings.
NOTE:
All settings should be changed with the
ignition in the “Run” position.
Display
After pressing the “Display” button on the touch-
screen the following settings will be available.
•
Display Mode
When in this display you may select one of the
auto display settings. To change Mode status,
select from “Day,” “Night” or “Auto” until a
check-mark appears next to the setting, show-
ing that setting has been selected. Then press
the arrow back button on the touchscreen.
NOTE:
When Day or Night is selected for the Dis-
play Mode, the usage of the Parade Mode
feature will cause the radio to activate the
Display Brightness Day control even though
the headlights are on.
•
Display Brightness With Headlights ON
When in this display, you may select the bright-
ness with the headlights on. Adjust the bright-
ness with the “+” and “–” setting buttons on the
touchscreen or by selecting any point on the
scale between the “+” and “–” buttons on the
touchscreen. Then press the arrow back button
on the touchscreen.
NOTE:
To make changes to the
ⴖ
Display Brightness
with Headlights ON
ⴖ
setting, the headlights
must be on and the interior dimmer switch
must not be in the
ⴖ
party
ⴖ
or
ⴖ
parade
ⴖ
posi-
tions.
205