RAM 2015 1500, Руководство по эксплуатации, Страница: 200 / 998

•
Tilt Mirrors In Reverse — If Equipped
When this feature is selected, the exterior
sideview mirrors will tilt downward when the
ignition is in the RUN position and the transmis-
sion shift lever/gear selector is in the REVERSE
position. The mirrors will move back to their
previous position when the transmission is
shifted out of REVERSE. To make your selec-
tion, press the “Tilt Mirrors In Reverse” button
on the touchscreen and make your selection.
Press the back arrow/Done button on the touch-
screen to return to the previous menu.
•
ParkView® Backup Camera Active
Guidelines
Your vehicle may be equipped with the ParkView®
Rear Back Up Camera Active Guidelines that al-
lows you to see active guidelines over the
ParkView Back up camera display whenever the
shift lever/gear selector is put into REVERSE. The
image will be displayed on the radio touchscreen
display along with a caution note to “check entire
surroundings” across the top of the screen. After
five seconds, this note will disappear. To make your
selection, press the “ParkView® Backup Camera
Active Guidelines” button on the touchscreen and
make your selection. Press arrow button on the
touchscreen to return to the previous menu.
•
ParkView® Backup Camera Delay
When the vehicle is shifted out of REVERSE (with
camera delay turned OFF), the rear camera mode
is exited and the navigation or audio screen
appears again. When the vehicle is shifted out of
REVERSE (with camera delay turned ON), the
rear view image with dynamic grid lines will be
displayed for up to 10 seconds after shifting out of
“REVERSE” unless the forward vehicle speed
exceeds 8 mph (12 km/h), the transmission is
shifted into PARK or the ignition is switched to the
OFF position. To set the ParkView® Backup Cam-
era Delay push the SETTINGS button on the
faceplate, then the “Safety & Driving Assistance”
button on the touchscreen. Press the “Parkview
Backup camera Delay” button on the touchscreen
to turn the ParkView® Delay ON or OFF.
•
Rain Sensing Auto Wipers
When this feature is selected, the system will
automatically activate the windshield wipers if it
senses moisture on the windshield. To make
your selection, press the “Rain Sensing” button
on the touchscreen and make your selection.
Press the back arrow/Done button on the touch-
screen to return to the previous menu.
•
Hill Start Assist — If Equipped
When this feature is selected, the Hill Start
Assist (HSA) system is active. Refer to “Elec-
tronic Brake Control System” in “Starting And
Operating” for system function and operating
information. To make your selection, press the
“Hill Start Assist” button on the touchscreen and
make your selection. Press the back arrow/
Done button on the touchscreen to return to the
previous menu.
197