RAM 2015 1500, Руководство по эксплуатации, Страница: 168 / 998

•
Unstored Messages
This message type is displayed indefinitely or
until the condition that activated the message is
cleared. Examples of this message type are
“Turn Signal On” (if a turn signal is left on) and
“Lights On” (if driver leaves the vehicle).
•
Unstored Messages Until RUN
These messages deal primarily with the Re-
mote Start feature. This message type is dis-
played until the ignition is in the RUN state.
Examples of this message type are “Remote
Start Aborted - Door Ajar” and “Press Brake
Pedal and Push Button to Start.”
•
Five Second Unstored Messages
When the appropriate conditions occur, this
type of message takes control of the main
display area for five seconds and then returns to
the previous screen. An example of this mes-
sage type is “Automatic High Beams On.”
Oil Life Reset
Your vehicle is equipped with an engine oil
change indicator system. The “Oil Change Re-
quired” message will display in the EVIC display
for approximately 10 seconds after a single
chime has sounded, to indicate the next sched-
uled oil change interval. The engine oil change
indicator system is duty cycle based, which
means the engine oil change interval may fluc-
tuate, dependent upon your personal driving
style.
NOTE:
Use the steering wheel EVIC controls for the
following procedure(s)
Vehicles Equipped With Passive Entry
1. Without pressing the brake pedal, press the
ENGINE START/STOP button and place the
ignition to the ON/RUN position (do not start
the engine).
2. Press and release the DOWN arrow button
to scroll downward through the main menu
to “Vehicle Info.”
3. Press and release the RIGHT arrow button
to access the ”Oil Life” screen.
4. Press and release the DOWN arrow button
to select “Reset,” then press and release the
Right arrow button to select reset of the Oil
Life to 100%.
5. Press and release the Up arrow button to
exit the EVIC screen.
Vehicles Not Equipped With Passive Entry
1. Without pressing the brake pedal, press the
ENGINE START/STOP button and place the
ignition to the ON/RUN position (do not start
the engine).
2. Press and release the LEFT arrow then
press and release the DOWN arrow button
to scroll downward through the main menu
to “Vehicle Info.”
3. Press and release the RIGHT arrow button
to access the “Vehicle Info” screen then
scroll UP or DOWN to select “Oil Life.”
165