RAM 1500 CLASSIC 2020 Скачать руководство пользователя страница 40

Страница: 40 / 360

GETTING TO KNOW YOUR VEHICLE

RAILER

OWING

IRRORS

—

QUIPPED

These mirrors are designed with an adjustable

mirror head to provide a greater vision range when

towing extra-wide loads. To change position

inboard or outboard, the mirror head should be

rotated (flipped in or out).

Trailer Towing Position

NOTE:

Fold the trailer towing mirrors rearward prior to

entering an automated car wash.
A small blindspot mirror is located next to main

mirror and can be adjusted separately.

Blindspot Mirror

EATED

IRRORS

— I

QUIPPED

These mirrors are heated to melt frost or

ice. This feature will be activated

whenever you turn on the rear window

defroster (if equipped).
Refer to “Climate Controls” in this chapter for

further information.

ILT

IDE

IRRORS

EVERSE

—

QUIPPED

Tilt Side Mirrors In Reverse provides automatic

outside mirror positioning which will aid the

driver’s view of the ground rearward of the front

doors. The outside mirrors will move slightly

downward from the present position when the

vehicle is shifted into REVERSE. The outside

mirrors will then return to the original position

when the vehicle is shifted out of the REVERSE

position.
NOTE:

The Tilt Side Mirrors In Reverse feature is not

turned on when delivered from the factory.
This feature can be programmed through the

Uconnect system. Refer to “Uconnect Settings” in

“Multimedia” for further information.

LLUMINATED

ANITY

IRROR

—

QUIPPED

Illuminated vanity mirrors are located on each sun

visor. To use the mirror, rotate the sun visor down

and swing the mirror cover upward. The lights will

turn on automatically. Closing the mirror cover

turns off the light.

CAUTION!

It is recommended to fold the mirrors into the

full rearward position to resist damage when

entering a car wash or a narrow location.

20_DS_OM_EN_USC_t.book Page 38

Содержание 1500 CLASSIC 2020









































































































































































































































































































































































Результаты поиска

Содержание 1500 CLASSIC 2020

Отзывы:

Похожие инструкции для 1500 CLASSIC 2020

Бренды по названию

Популярные бренды

RAM 1500 CLASSIC 2020, Руководство пользователя

Результаты поиска

Содержание 1500 CLASSIC 2020

Отзывы:

Похожие инструкции для 1500 CLASSIC 2020

Бренды по названию

Популярные бренды