GETTING TO KNOW YOUR VEHICLE
37
Power Mirror Movement
P
OWER
F
OLDING
O
UTSIDE
M
IRRORS
F
OR
S
TANDARD
A
ND
T
RAILER
T
OW
—
I
F
E
QUIPPED
If equipped with power folding mirrors, they can be
electrically folded rearward and unfolded into the
drive position.
The switch for the power folding mirrors is located
between the power mirror switches L (left) and R
(right). Push the switch once and the mirrors will
fold in, push the switch a second time and the
mirrors will return to the normal driving position.
If the mirror is manually folded after electrically
cycled, a potential extra button push is required to
get the mirrors back to the home position. If the
mirror does not electrically fold, check for ice or dirt
buildup at the pivot area which can cause
excessive drag.
Power Folding Mirror Switch
Resetting The Power Folding Outside Mirrors
You may need to reset the power folding mirrors if
the following occurs:
The mirrors are accidentally blocked while
folding.
The mirrors are accidentally manually folded/
unfolded.
The mirrors come out of the unfolded position.
The mirrors shake and vibrate at normal driving
speeds.
To Reset The Power Folding Mirrors:
1. Using the power folding mirror switch, move
the mirror to its full forward position.
2. Using the power folding mirror switch, move
the mirror to the full retract position (this may
require multiple button pushes). This resets
them to their normal position.
NOTE:
The power fold mirrors are designed to operate
while the vehicle is stationary or traveling at
moderate speeds. If you attempt to power fold
the mirrors at high speeds they may not fully
open or close. You should slow down to a
moderate speed and complete the operation.
When pushing the power fold button 10 or more
times in one minute the system shuts down for
one minute to protect the motors from over
heating.
Outside Mirrors Folding Feature
All outside mirrors are designed to be able to be
manually folded both forward and rearward to
prevent damage.
Folding Mirror
2
20_DS_OM_EN_USC_t.book Page 37
