RAM 1500 2023 страница 70 Скачать руководство пользователя

Страница: 70 / 416

GETTING TO KNOW YOUR VEHICLE

Certain video game consoles exceed this power limit, as

will most power tools.

Center Stack Power Inverter

To turn on the power outlet, simply plug in a device.

The outlet turns off when the device is unplugged.

NOTE:



The Center Stack Power Inverter is only available on

vehicles equipped with a front bench seat.



The power inverter only turns on if the ignition is in the

ACC or ON/RUN position.



Due to built-in overload protection, the power inverter

shuts down if the power rating is exceeded.

IRELESS

HARGING

—

QUIPPED

Wireless Charging Pad

Your vehicle may be equipped with a 15W 3A Qi wireless

charging pad located inside of the center console.

This charging pad is designed to wirelessly charge your

Qi enabled mobile phone. Qi is a standard that allows

wireless charging of your mobile phone.

Your mobile phone must be designed for Qi wireless

charging. If the phone is not equipped with Qi wireless

charging functionality, an aftermarket sleeve or a

specialized back plate can be purchased from your mobile

phone provider or a local electronics retailer. Please see

your phone’s owner’s manual for further information.
The wireless charging pad is equipped with an anti-slip

mat, a cradle to hold your mobile phone in place, and an

LED indicator light.
LED Indicator Status:

NOTE:

Using a phone case may interfere with wireless charging.



No Light: Charging pad is idle or searching for a device.



Blue Light: Device is detected, and is charging.



Red Light/Flashing: Internal error, or foreign object is

detected.

Important Notes Regarding This Vehicle’s Wireless

Charging Pad:



The ignition must be in the ON/RUN or START position

and all vehicle doors must be closed for the wireless

charging pad to operate.



Wireless charging is not as fast as when the phone is

connected to a wired charger.



The phone’s protective case must be removed when

placed on the wireless charging pad.

WARNING!

To avoid serious injury or death:



Do not insert any objects into the receptacles.



Do not touch with wet hands.



Close the lid when not in use.



If this outlet is mishandled, it may cause an electric

shock and failure.

23_DT_OM_EN_USC_t.book Page 68

Содержание 1500 2023

































































































































































































































































































































































































































Результаты поиска

Содержание 1500 2023

Отзывы:

Похожие инструкции для 1500 2023

Бренды по названию

Популярные бренды

RAM 1500 2023, Руководство пользователя

Результаты поиска

Содержание 1500 2023

Отзывы:

Похожие инструкции для 1500 2023

Бренды по названию

Популярные бренды