RAM 1500 2023 страница 38 Скачать руководство пользователя

Страница: 38 / 416

GETTING TO KNOW YOUR VEHICLE

Rear Head Restraints

The outboard head restraints are non-adjustable, but can

be folded down for improved rearward visibility. Push the

button on the outboard side of the head restraint to

release. To return the head restraint to its upright position,

push up on the head restraint until it locks back into place.

Release Button

The center head restraint is not adjustable or removable.

NOTE:

The head restraints should only be removed by qualified

technicians, for service purposes only. If any of the head

restraints require removal, see an authorized dealer.
For child restraint tethering, see

page 282.

UCONNECT VOICE RECOGNITION —

IF EQUIPPED

NTRODUCING

OICE

ECOGNITION

Start using Uconnect Voice Recognition with these helpful

quick tips. It provides the key Voice Commands and tips

you need to know to control your vehicle’s Voice

Recognition (VR) system. This system is only available on

the Uconnect 3 With 5-inch Display, Uconnect 5 NAV With

8.4-inch Display, and the Uconnect 5 NAV With 12-inch

Display.

Uconnect 3 With 5-inch Display

If you see the NAV icon on the bottom bar or in the Apps

menu of your 8.4-inch touchscreen, you have the

Uconnect 5 NAV system. If not, you have a Uconnect 5 with

8.4-inch display system.

ASIC

OICE

OMMANDS

The following basic Voice Commands can be given at any

point while using your Uconnect system.

Push the VR button

or for the Uconnect 5/5 NAV, say

the vehicle’s “Wake Up” word, “Hey Uconnect”. After the

beep, say:



“Cancel” to stop a current voice session.



“Help” to hear a list of suggested Voice Commands.



“Repeat” to listen to the system prompts again.

Notice the visual cues that inform you of your Voice

Recognition system’s status.

NOTE:

On Uconnect 5 systems, the factory default “Wake Up”

word is set to “Hey Uconnect” and can be reprogrammed

through the Uconnect Settings.

WARNING!

Sitting in a seat with the head restraint in its lowered

position could result in serious injury or death in a

collision. Always make sure the outboard head

restraints are in their upright positions when the seat is

to be occupied.

23_DT_OM_EN_USC_t.book Page 36

Содержание 1500 2023

































































































































































































































































































































































































































Результаты поиска

Содержание 1500 2023

Отзывы:

Похожие инструкции для 1500 2023

Бренды по названию

Популярные бренды

RAM 1500 2023, Руководство пользователя

Результаты поиска

Содержание 1500 2023

Отзывы:

Похожие инструкции для 1500 2023

Бренды по названию

Популярные бренды