RAM 1500 2023 страница 68 Скачать руководство пользователя

Страница: 68 / 416

GETTING TO KNOW YOUR VEHICLE

NOTE:

Charge unsupported devices with the Charge Only USB

ports. If an unsupported device is plugged into a Media

USB port, a message will display on the touchscreen that

the device is not supported by the system.
Plugging in a phone or another USB device may cause the

connection to a previous device to be lost.
If equipped, your vehicle may also contain a USB port

located on the top tray of the vehicle’s center console.
If equipped, two Mini-USB ports (Type C), two Standard

USB ports (Type A), and one AUX port may be located to the

left of the center stack, just below the climate controls.

Center Console USB/AUX Media Hub

Some USB ports support media and charging. You can use

features, such as Apple CarPlay®, Android Auto™,

Pandora®, and others while charging your phone.

NOTE:

Plugging in a phone or another USB device may cause the

connection to a previous device to be lost.
For further information, refer to the Uconnect Radio

Instruction Manual or visit UconnectPhone.com.

LECTRICAL

OWER

UTLETS

The auxiliary 12 Volt (13 Amp) power outlet can provide

power for in-cab accessories designed for use with the

standard “cigarette lighter” style plug. The 12 Volt power

outlets and 5 Volt (2.5 Amp) USB Port (Charge Only) have

a cap attached to the outlet indicating “12V DC”, together

with either a key symbol, battery symbol, or USB symbol.

An auxiliary power outlet can be found in the tray on top of

the center stack. This power outlet works when the ignition

is in the ON/RUN, ACC, or OFF position.

Power Outlet — Top Of Center Stack

Power Outlet Fuse Locations

1 — Standard USB Type A Ports
2 — Mini-USB Type C Ports
3 — AUX Port

CAUTION!



Do not exceed the maximum power of 160 Watts

(13 Amps) at 12 Volts. If the 160 Watts (13 Amps)

power rating is exceeded, the fuse protecting the

system will need to be replaced.



Power outlets are designed for accessory plugs only.

Do not insert any other object in the power outlets as

this will damage the outlet and blow the fuse.

Improper use of the power outlet can cause damage

not covered by your New Vehicle Limited Warranty.

1 — F54 Fuse 20 A Yellow Power Outlet Battery Fed

Position
2 — F54 Fuse 20 A Yellow Power Outlet Ignition Fed

Position
3 — F48 Fuse 10 A Red Port Power or Rear USB

(Charge Only)

23_DT_OM_EN_USC_t.book Page 66

Содержание 1500 2023

































































































































































































































































































































































































































Результаты поиска

Содержание 1500 2023

Отзывы:

Похожие инструкции для 1500 2023

Бренды по названию

Популярные бренды

RAM 1500 2023, Руководство пользователя

Результаты поиска

Содержание 1500 2023

Отзывы:

Похожие инструкции для 1500 2023

Бренды по названию

Популярные бренды