RAM 1500 2023 Скачать руководство пользователя страница 39

Страница: 39 / 416

GETTING TO KNOW YOUR VEHICLE

TARTED

The

VR button is used to activate/deactivate your

Voice Recognition system.
Helpful hints for using Voice Recognition:
1. Visit UconnectPhone.com to check mobile device

and feature compatibility and to find phone pairing

instructions.

2. Reduce background noise. Wind noise and

passenger conversations are examples of noise that

may impact recognition.

3. Speak clearly at a normal pace and volume while

facing straight ahead. The microphone is located in

the headliner and aimed at the driver.

4. Each time you give a Voice Command, you must first

push either the VR or Phone button, wait until after

the beep, then say your Voice Command. You can

also say the vehicle “Wake Up” word and state your

command. Some examples of “Wake Up” words

include “Hey Uconnect” or “Hey Ram”.

5. You can interrupt the help message or system

prompts by pushing the VR or Phone button and

saying a Voice Command from the current category.

Uconnect Voice Command Buttons

DDITIONAL

NFORMATION

Uconnect are registered trademarks and Mopar Owner

Connect is a trademark of FCA US LLC. SiriusXM® and all

related marks and logos are trademarks of SiriusXM®

Radio Inc.
Uconnect System Support:



US residents visit www.DriveUconnect.com or call:

1-877-855-8400 (24 hours a day 7 days a week)



Canadian residents visit www.DriveUconnect.ca or call:

1-800-465-2001 (English) or 1-800-387-9983

(French)

SiriusXM Guardian™ services support:



US residents visit www.driveuconnect.com/

sirius-xm-guardian or call: 1-844-796-4827



Canadian residents visit https://www.driveucon

nect.ca/en/sirius-xm-guardian or call:

1-877-324-9091

1 — For The Uconnect 5/5 NAV System Vehicles

Equipped With Navigation: Push The Phone Button To

Begin Radio, Media, Navigation, Climate, Start Or Answer

A Phone Call, And Send Or Receive A Text

1 — For The Uconnect 5/5 NAV System Vehicles Not

Equipped With Navigation: Push The Phone Button To An

swer An Incoming Phone Call
2 — Push To Access The Tile Feature
3 — Push The Hang Up Button To End A Call Currently In

Progress

23_DT_OM_EN_USC_t.book Page 37

Содержание 1500 2023

































































































































































































































































































































































































































Результаты поиска

Содержание 1500 2023

Отзывы:

RAM 1500 2023, Руководство пользователя, Страница: 39 / 416

Результаты поиска

Содержание 1500 2023

Отзывы: