RAM 1500 2023 страница 325 Скачать руководство пользователя

Страница: 325 / 416

IN CASE OF EMERGENCY

323

6. Remove the lug nuts and pull the wheel off. Install the

spare wheel and lug nuts with the cone shaped end

of the lug nuts toward the wheel. Hand tighten the lug

nuts with the vehicle lifted. To avoid the risk of forcing

the vehicle off the jack, do not fully tighten the lug

nuts until the vehicle has been completely lowered.

7. Lower the vehicle to the ground and finish tightening

the lug nuts. Push down on the wrench handle for

increased leverage. Tighten the lug nuts in a star

pattern until each lug nut has been tightened twice

page 392. If in doubt about the correct tightness,

have them checked with a torque wrench by an

authorized dealer or at a service station.

8. If your vehicle is equipped with a wheel center cap,

install the cap and remove the wheel blocks. Do not

install chrome or aluminum wheel center caps on the

spare wheel. This may result in cap damage.

9. Lower the jack to its fully closed position. Stow the

replaced tire, and secure the jack and tools in the

proper location.

10. Adjust the tire pressure when possible.

TOW

LAT

PARE

1. Lift the spare tire with one hand to give clearance to

tilt the retainer at the end of the cable.

2. Position the wheel behind the rear fascia/bumper

facing outward. Push the end of the winch’s cable,

spring and steel sleeve through the back of the road

wheel. Making sure the valve stem is facing the

ground when the wheel is stowed.

Reinstalling The Retainer

3. Remove the extension with the hook and reattach the

short extension #5

page 318. Attach the lug

wrench to the extension tubes with the curved angle

facing away from the vehicle. Insert the extension

tubes through the access hole between the lower

tailgate and the top of the fascia/bumper and into the

winch mechanism tube.

Reinstalling The Flat Or Spare Tire

WARNING!

A loose tire or jack thrown forward in a collision or hard

stop, could endanger the occupants of the vehicle.

Always stow the jack parts and the spare tire in the

places provided.

CAUTION!

The winch mechanism is designed for use with the jack

extension tube only. Use of an air wrench or other

power tools is not recommended and can damage the

winch.

23_DT_OM_EN_USC_t.book Page 323

Содержание 1500 2023

































































































































































































































































































































































































































Результаты поиска

Содержание 1500 2023

Отзывы:

Похожие инструкции для 1500 2023

Бренды по названию

Популярные бренды

RAM 1500 2023, Руководство пользователя

Результаты поиска

Содержание 1500 2023

Отзывы:

Похожие инструкции для 1500 2023

Бренды по названию

Популярные бренды