RAM 1500 2023 страница 11 Скачать руководство пользователя

Страница: 11 / 416

SYMBOLS KEY

If you do not read the entire Owner’s Manual, you may miss important information.

Observe all Cautions and Warnings.

VAN CONVERSIONS/CAMPERS

The New Vehicle Limited Warranty does not apply to body modifications or special

equipment installed by van conversion/camper manufacturers/body builders.

US residents refer to the Warranty Information, Section 2.1.C. Canadian residents refer to

the “What Is Not Covered” section of the Warranty Information. Such equipment includes

video monitors, DVD/Blu-Ray™, heaters, stoves, refrigerators, etc. For warranty coverage

and service on these items, contact the applicable manufacturer.

CONSUMER INFORMATION — TRUCK-CAMPER LOADING

This information is provided in fulfillment of the requirement by the United States

Government, Department of Transportation, National Highway Traffic Safety

Administration, that “every manufacturer of trucks that are capable of accommodating

slide-in campers, manufactured on or after April 1, 1973 shall provide... at the time of

original purchase to the first person who purchases the truck”... information on Truck

Camper Loading.
A slide-in camper document is provided in your vehicle’s glove compartment that contains

your Vehicle Identification Number, truck model, cargo weight rating, and the forward/

rearward limit of a camper. To obtain additional dimensional and technical specifications

for your vehicle, please visit https://www.ramtrucks.com.

WARNING!

These statements apply to operating procedures that

could result in a collision, bodily injury and/or death.

CAUTION!

These statements apply to procedures that could result in

damage to your vehicle.

NOTE:

A suggestion which will improve installation, operation,

and reliability. If not followed, may result in damage.

TIP:

General ideas/solutions/suggestions on easier use of the

product or functionality.

PAGE REFERENCE ARROW

Follow this reference for additional information on a

particular feature.

FOOTNOTE

Supplementary and relevant information pertaining to

the topic.

23_DT_OM_EN_USC_t.book Page 9

Содержание 1500 2023

































































































































































































































































































































































































































Результаты поиска

Содержание 1500 2023

Отзывы:

Похожие инструкции для 1500 2023

Бренды по названию

Популярные бренды

RAM 1500 2023, Руководство пользователя

Результаты поиска

Содержание 1500 2023

Отзывы:

Похожие инструкции для 1500 2023

Бренды по названию

Популярные бренды