RAM 1500 2023 Скачать руководство пользователя страница 105

Страница: 105 / 416

GETTING TO KNOW YOUR INSTRUMENT PANEL

103

Trip Info

Push and release the up

or down

arrow button until

the Trip menu item is highlighted in the instrument cluster
display. Push and release the right

or left

arrow

button to enter the submenus of Trip A and Trip B. The Trip

A or Trip B information will display the following:



Distance



Average Fuel Economy



Elapsed Time

Push and hold OK button to reset all information.

Navigation — If Equipped

Push and release the up

or down

arrow button until

the Navigation display title is highlighted in the instrument

cluster display, “Hold OK to Start Route” will display when

no active route is set. “Hold OK to Cancel Route” will
display when active route is set. Use the left

or right

arrow button to zoom in or out on the display

page 191.

Stop/Start — If Equipped

Push and release the up

or down

arrow button until

the Stop/Start icon/title is highlighted in the instrument

cluster display. The screen will display the Stop/Start

status.

Trailer Tow — If Equipped

Push and release the up

or down

arrow button until

the Trailer Tow menu item is highlighted in the instrument
cluster display. Push and release the right

or left

arrow button to cycle through the following trailer tow

information:



Trip (trailer specific) Distance: Push and hold the OK

button to reset the distance.



Integrated Trailer Brake Module (ITBM):



Braking Output



Trailer Type



ITBM Gain



Trailer Tire Pressure Monitoring: The Instrument

Cluster Display will display the Trailer Tire Pressure for

a connected trailer with sensors that match the active

trailer profile. When a low tire is present, the low tire

value will be displayed in red, and the affected low tire

will have a red glow. “Trailer Tire Low“ will be displayed

on the center bottom of the Instrument Cluster Display

screen.



Trailer Light Check — If Equipped: Push and hold the OK

button to begin the Trailer Light Test sequence

page 182.

Audio

Push and release the up

or down

arrow button until

the Audio Menu icon/title is highlighted in the instrument

cluster display. This menu will display the audio source

information, including the Song name, Artist name, and

audio source with an accompanying graphic.
Phone Call Status
When a call is incoming, a Phone Call Status pop-up will

display on the screen. The pop-up will remain until the

phone is answered or ignored.

NOTE:

The call status will temporarily replace the previous media

source information displayed on the screen. When the

pop-up is no longer displayed, the display will return to the

last used screen.

Stored Messages

Push and release the up

or down

arrow button until

the Messages Menu item is highlighted. This feature

shows the number of stored warning messages Example:
“Oil Change Required”. Push and release the right

left

arrow button to cycle through stored messages.

23_DT_OM_EN_USC_t.book Page 103

Содержание 1500 2023

































































































































































































































































































































































































































Результаты поиска

Содержание 1500 2023

Отзывы:

RAM 1500 2023, Руководство пользователя, Страница: 105 / 416

Результаты поиска

Содержание 1500 2023

Отзывы: