RAM 1500 2019, Руководство пользователя

Страница: 194 / 340

4. Using a ballpoint pen or similar object,
push and hold the recessed transfer case
NEUTRAL (N) button (at the center of the
transfer case switches). The NEUTRAL
(N) indicator light will illuminate, and
remain lit, when the shift to NEUTRAL (N)
is complete. After the shift is completed
and the NEUTRAL (N) light stays on,
release the NEUTRAL (N) button.
5. Release the parking brake.
6. Shift the transmission into REVERSE.
7. Release the brake pedal for five seconds
and ensure that there is no vehicle
movement.
8. Repeat steps 6 and 7 with the transmis-
sion in DRIVE.
9. Shift the transmission to NEUTRAL. Ap-
ply the parking brake. Turn OFF the en-
gine. For vehicles with Keyless Enter-N-
Go, push and hold the ENGINE START/
STOP button until the engine shuts off.
The transmission will automatically select
PARK when the engine is turned off.
10. Turn the ignition to the OFF mode.
11. Attach the vehicle to the tow vehicle
using a suitable tow bar.
12. Turn the ignition to the ON/RUN mode,
but do not start the engine.
13. Release the parking brake.
14. Turn the ignition OFF.
NOTE:
• Steps 2 and 3 are requirements that must
be met before pushing the NEUTRAL (N)
button, and must continue to be met until
the shift has been completed. If any of
these requirements are not met before
pushing the NEUTRAL (N) button or are no
longer met during the shift, the NEUTRAL
(N) indicator light will flash continuously
until all requirements are met or until the
NEUTRAL (N) button is released.
• The ignition must be in the ON/RUN mode
for a shift to take place and for the position
indicator lights to be operable. If the igni-
tion is not in the ON/RUN mode, the shift
will not take place and no position indicator
lights will be on or flashing.
• A flashing NEUTRAL (N) position indicator
light indicates that shift requirements have
not been met.
• If the vehicle is equipped with air suspen-
sion, the engine should be started and left
running for a minimum of 60 seconds (with
all the doors closed) at least once every
24 hours. This process allows the air sus-
pension to adjust the vehicle’s ride height
to compensate for temperature effects.
Shifting Out Of NEUTRAL (N)
Use the following procedure to prepare your
vehicle for normal usage:
1. Bring the vehicle to a complete stop,
leaving it connected to the tow vehicle.
2. Press and hold the brake pedal.
3. Start the engine. Apply the parking brake.
Shift the transmission into NEUTRAL.
4. Using a ballpoint pen or similar object,
push and hold the recessed transfer case
NEUTRAL (N) button (at the center of the
transfer case switches).
ST
ARTING
AND
OPERA
TING
192