RAM 1500 2018 Скачать руководство пользователя страница 243

Страница: 243 / 700

inflate in less time than it takes to blink your eyes. The

front air bags then quickly deflate while helping to restrain

the driver and front passenger.
Knee Impact Bolsters
The Knee Impact Bolsters help protect the knees of the

driver and front passenger, and position the front occu-

pants for improved interaction with the front air bags.

WARNING!

•

Do not drill, cut, or tamper with the knee impact
bolsters in any way.

•

Do not mount any accessories to the knee impact
bolsters such as alarm lights, stereos, citizen band
radios, etc.

Supplemental Side Air Bags
Ram 1500

Supplemental Seat-Mounted Side Air Bags (SABs)

This vehicle is equipped with Supplemental Seat-Mounted

Side Air Bags (SABs).

Supplemental Seat-Mounted Side Air Bags (SABs) are

located in the outboard side of the front seats. The SABs are

marked with a “SRS AIRBAG” or “AIRBAG” label sewn

into the outboard side of the seats.
The SABs may help to reduce the risk of occupant injury

during certain side impacts, in addition to the injury

reduction potential provided by the seat belts and body

structure.

When the SAB deploys, it opens the seam on the outboard

side of the seatback’s trim cover. The inflating SAB deploys

through the seat seam into the space between the occupant

Supplemental Seat-Mounted Side Air Bag Label

SAFETY

241

Содержание 1500 2018





























































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 1500 2018

Отзывы:

Похожие инструкции для 1500 2018

Бренды по названию

Популярные бренды

RAM 1500 2018, Руководство пользователя

Результаты поиска

Содержание 1500 2018

Отзывы:

Похожие инструкции для 1500 2018

Бренды по названию

Популярные бренды